An igniter that clicks all night, a coil that glows on one side only, a glass top with a fresh crack: these are the calls we take every day. One call connects you with a licensed, insured independent cooktop pro around Iola.
We do not send just anyone with a toolbox. The pros in our network work on cooktops week in and week out, and they know the difference between a bad spark module and a wet burner head.
Every contractor we connect you with runs their own licensed, insured business. Gas work on a range touches a supply line, so ask the pro about their gas certification for your area before work starts.
You see the number before a screwdriver turns. The pro gives you a written, upfront quote after the diagnosis, and the choice to proceed is yours.
We work the local schedule while you are still on the phone. Same-day visits happen often when a nearby pro has an open slot, and the dispatcher pins down a time window before you go.
Expect a manometer, a digital multimeter, an orifice set, and tech sheets for slide-in, freestanding and pro-style ranges. The right tools mean the first visit is usually the one that gets the burner going again.
We hear from people with forty-year-old coil ranges and from people with brand-new induction cooktops. Different machines, same goal: get the burners working and safe again, without paying for guesswork.
Have the model number handy if you can. It usually sits on a sticker under the cooktop lip, inside the storage drawer, or behind the lower kick panel, and it lets the tech pull the right parts list before arrival.
Most stove calls fall into one of these groups. Each one needs different parts and a different test, which is why we ask a few questions before we dispatch.
A burner that clicks and clicks after it lights, or one that never sparks at all, usually points to a wet or cracked igniter, a stuck valve switch, or a failing spark module. The tech checks each electrode gap and listens for which burner the module is firing.
A healthy flame is crisp and blue. Yellow tips, lazy flames or flames that lift off the ports point to clogged burner ports, a misaligned burner cap, a dirty orifice or a regulator problem. The pro clears the ports, reseats the cap and head, and checks pressure with a manometer.
When a coil burner stays cold, the culprit is usually the element, the receptacle block it plugs into, or the infinite switch behind the knob. A scorched or melted receptacle has to be replaced along with its wiring terminals, or the new coil will fail too.
A crack in a smooth-top is more than cosmetic: spills can reach live elements underneath. The tech tests the radiant element and limiter, checks the hot-surface indicator, and quotes a new glass top if the old one is damaged.
Induction cooktops throw error codes when a pan is not magnetic, the cooling fan stalls, or the power board fails. The pro reads the code, tests cookware compatibility with a magnet, and checks the fan and board before any part goes in.
Stripped knobs, stiff valve stems and gas valves that leak by are common on busy kitchens. The pros also convert cooktops between natural gas and LP orifices and install the anti-tip bracket that keeps a freestanding range from tipping onto a child.
This table is not a substitute for a diagnosis, but it helps you describe the problem clearly to our dispatcher.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Clicking that will not stop | Wet or shorted valve switch, cracked igniter | Switch continuity, harness, igniter gap |
| No spark on any burner | Spark module or power supply | Module output and incoming voltage |
| Yellow or lifting flame | Clogged ports, wrong orifice, pressure off | Ports, cap seating, manometer reading |
| Coil only heats on high | Failed infinite switch | Switch cycling with a multimeter |
| Smooth-top zone stays cold | Radiant element or limiter open | Element and limiter resistance |
| Induction error code | Cookware, fan or power board | Code lookup, fan, board voltages |
The process is short on purpose. You call, a local pro shows up, you see a quote, and the burner gets tested in front of you.
One phone call starts everything. Tell us what the cooktop is doing, and we look for a nearby pro with time on the schedule.
The technician drives to your home with common igniters, coil elements, switches and orifices on the truck. You get the arrival window on the call, and callers frequently see a pro the same day when someone nearby is available.
The pro tests the burner circuit or gas train with a multimeter or manometer, explains what failed, and writes an upfront quote. Nothing gets replaced until you say yes.
The job ends with a real test: each burner on low, medium and high, plus a soap or electronic leak check on gas connections. Ask the pro to put the parts and labor warranty in writing.
The technicians we route you to work from the tech sheet tucked inside most ranges. They test first, then quote. If a part is not on the truck, they tell you how long the order takes and book the return trip.
Our dispatch line is answered day and night.
Our front left burner clicked for two days straight, even with the knob off. The tech found that a pot of pasta water had boiled over into the switch harness. He dried it, replaced one valve switch, and the clicking stopped. The quote was written out before he started.
A tenant called me about a coil burner that sparked when it was plugged in. The pro found the burner block had cooked itself, swapped the block and the element, and explained why both had to go together.
The induction top flashed a code every time I boiled water. The pro ruled out my cookware, then found a seized cooling fan under the glass. Simple fix once someone actually opened it up.
Our range needed an LP conversion after the move. The technician changed the orifices and regulator setting, then mounted the anti-tip bracket. The flames are blue and steady now.
Nonstop clicking usually means moisture or grease has reached a valve switch or igniter, so the spark module thinks a burner is still asking for a spark. Sometimes drying it out helps, but a shorted switch needs replacing.
It is worth treating as a warning. Healthy burners show a firm blue flame. Yellow tips point to a dirty burner, a misaligned cap, or gas pressure that is off, and the technician can confirm it with a manometer.
Shut off power at the breaker for an electric range, or close the gas shutoff valve behind a gas range, then call us. A burner stuck on usually means a welded infinite switch, a stuck relay, or a valve that will not seat.
Cracked glass ceramic cannot be patched safely. The fix is a replacement top, and the pro checks the radiant elements and limiter while it is off. Avoid using the cooktop until then.
Yes, in most cases. The conversion involves new orifices sized for propane, a regulator change, and low-flame adjustments on each valve. Ask the technician to leak-test every fitting when the job is done.
Induction only works with magnetic cookware. If a magnet does not stick firmly to the bottom of the pan, the zone will not heat. If your pans pass the magnet test, the technician looks at the coil, sensor and power board next.
We route stove calls from across Iola and the surrounding towns. Whether your range sits in a downtown condo or a farmhouse at the edge of the county line, our dispatchers look for the closest pro with time to come out.
If you manage rentals, mention the unit and the tenant contact when you call. The dispatcher passes it to the pro so the visit goes smoothly.
One call to our dispatch line connects you with a local stove pro.
